The below information is taken from the BBC website:

A Paris court has said Continental Airlines was “criminally responsible” for the crash of a Concorde supersonic jet 10 years ago, and fined it 200,000 euros (£170,000).

It has also been ordered to pay 1m euros to the jet’s operator Air France.

A Continental mechanic, John Taylor, was given a 15-month suspended prison sentence over the crash.

Continental has said it will appeal, saying the verdict is “absurd” and “only protects French interests”.

Another airline operative, Stanley Ford, and three French officials were cleared.

The Concorde caught fire shortly after take-off from Charles de Gaulle airport in Paris in July 2000, killing 113 people.

The court ruled that the crash was caused by a piece of metal left on the runway after falling from a Continental jet. Investigators said this caused a tyre-burst in the Concorde, which in turn ruptured a fuel tank.

The judge in the case confirmed investigators’ findings that titanium debris dropped by a Continental DC-10 onto the runway at Charles de Gaulle airport before the Concorde took off was to blame.

Mr Taylor should not have used titanium parts to make repairs on the DC-10 because the metal was known to be too dangerous for aeroplane tyres, and he should have used a softer metal, aluminium, instead, the court found.

Continental had disputed this interpretation, saying the airliner, operated by Air France, was already in flames before it hit the small piece of titanium.

“While we agree with the court’s decision that Stanley Ford was innocent of the charges he faced and we share his relief that his decade-long nightmare is over, we strongly disagree with the court’s verdict regarding Continental Airlines and John Taylor and will of course appeal this absurd finding,” a UK-based Continental spokesman said in a statement.

“Portraying the metal strip as the cause of the accident, and Continental and one of its employees as the sole guilty parties, shows the determination of the French authorities to shift attention and blame away from Air France, which was government-owned at the time and operated and maintained the aircraft, as well as from the French authorities responsible for the Concorde’s airworthiness and safety.”

Compensation

Financial claims were not the trial’s focus, but apportioning blame was, says the BBC’s Christian Fraser in Paris.

However, the court ruled that Continental should pay 70% of any compensation claims to the families of victims. Aerospace group EADS was asked to pay the remaining 30%.

Following Monday’s verdict, Air France, which paid out 100m euros in compensation, may decide to seek to reclaim some of that money from Continental.

There is a separate court case taking place over economic compensation for the crash.

Most of the passengers were German tourists heading to New York to join a luxury cruise to the Caribbean. Nine French crew members and four hotel workers also died.

Digg This
Reddit This
Stumble Now!
Buzz This
Vote on DZone
Share on Facebook
Bookmark this on Delicious
Kick It on DotNetKicks.com
Shout it
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

The latest date for the ISO 9001:2008 IRCA Registered Lead Auditor Course has been set for the 7th-11th February 2011.  The course teaches you everything you need to know in order to attain your lead auditor status but will also provide you with the knowledge required to perform internal or supplier audits.

The course location has yet to be established but we will update you of this when it has been agreed.

If you would like to book a placement on the course or would like any further information please do not hesitate to contact IMS.

Digg This
Reddit This
Stumble Now!
Buzz This
Vote on DZone
Share on Facebook
Bookmark this on Delicious
Kick It on DotNetKicks.com
Shout it
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

The following information is taken from the Netregs website:  Remade South East are offering free workshops for anyone in the construction business who needs help to improve how they deal with waste on site.  Below are the course dates as per the netregs website, click on the registration hyperlink to book onto a course:

Event name Date Location Registration details
Croydon Business Advice Open Day Wednesday 29 September 2010 Fairfield Halls HMRC
Remade South East construction workshop: Managing waste resources on construction sites Thursday 16 September Seattle Hotel, Brighton Remade South East
Remade South East construction workshop: Site waste management plans – understanding your legal requirements Thursday 21 October Bricks and Bread Sustainable Living Centre, Aldershot Remade South East
Remade South East construction workshop: Choosing sustainable products for construction projects Tuesday 30 November Trinity College, Oxford Remade South East
EcoShow Live Northern Ireland Friday 8 – Sunday 10 October Kings Hall, Belfast EcoShow Live
Manchester Business Advice Open Day Tuesday 9 November 2010 Man City Football Club HMRC
Digg This
Reddit This
Stumble Now!
Buzz This
Vote on DZone
Share on Facebook
Bookmark this on Delicious
Kick It on DotNetKicks.com
Shout it
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

IMS International in Partnership with CMC International have spaces available for the next ISO 9001:2008 IRCA Lead Auditor Course to be held the week commencing 8th November 2010 at the Dunton Hills Golf Course in Brentwood, Essex.  The price of the course is £600 plus VAT and lasts for 5 days, all course literature is provided within the cost and lunch is provided.

The course is IRCA Registered and will allow all successful attendees to become approved Lead Auditors and perform internal audits or third party external audits.

If you are interested in attending the course please contact the IMS office on 013676 500068 or send an email to info {at} imsworld(.)org.

Digg This
Reddit This
Stumble Now!
Buzz This
Vote on DZone
Share on Facebook
Bookmark this on Delicious
Kick It on DotNetKicks.com
Shout it
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

November 2008 marked the release of ISO 9001:2008 to replace ISO 9001:2000 and brought with it a number of minor amendments.

Whilst most client’s have already implemented the changes required to meet the new standard there still remains a number of organisations who need to make the changes in time for the deadline.

All organisations currently certified to ISO 9001:2000 have until the 14th November 2010 to complete the transition otherwise their certification will lapse and the certification process will need to start again.

There were not any major changes to the standard so transition should not be a timely or difficult task, however, client’s will need to read the new standard carefully as some of the changes or not immediately apparent.

If anyone is concerned that they may not be able to make the deadline please do not hesitate to contact IMS and we will aim to help you as much as possible.

Digg This
Reddit This
Stumble Now!
Buzz This
Vote on DZone
Share on Facebook
Bookmark this on Delicious
Kick It on DotNetKicks.com
Shout it
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

The Department of the Environment for Northern Ireland (DOE) is consulting on new regulations to introduce minimum requirements for new and existing above ground storage facilities.

The regulations will effect oil storage tanks over 200 Litres in size and is due for release in the Autumn of 2010.  Draft Regs have been published and can be downloaded from the Netregs website.

All tanks will need to be bunded (secondary containment), the bund must have a capacity of not less than 110% of the containers storage capacity or, if there is more than one container within the system, of not less than 110% of the largest container’s storage capacity or 25% of their aggregate storage capacity.  Those of you who are already ISO 14001 Certified and store waste chemicals will be used to this practice as part of your Hazardous Waste Controls.

Some of the other requirements will detail the positioning and protection requirements for tanks, the maintenance checks to be performed to prevent leaks and fixture and fitting requirements.

The consultation period is due to finish in June, IMS will publish information upon its formal release.

Digg This
Reddit This
Stumble Now!
Buzz This
Vote on DZone
Share on Facebook
Bookmark this on Delicious
Kick It on DotNetKicks.com
Shout it
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

A number of organisations are either introducing AS9100 (Aerospace Quality Management System) or working on transitioning their current AS9100 system to meet the requirements of Rev C.

Please be aware that no UKAS Accredited Certification Body is permitted to audit to the new revision as yet.  We are aware that the new standard was released over 12 months ago but the transition requirements have not yet been fully determined.  UKAS are hoping that the transition process will begin for Certification Bodies in the first few months of 2011 and we can then start auditing to rev C by the middle of 2011.

A number of you have already started to introduce the requirements, this is fine and it is in fact encouraged to start the planning process as early as possible.  However, if you do introduce new requirements you need to ensure that the old revision requirements (rev B) are still being met and contained within your system.  IMS and other Certification Bodies will still audit to Rev B for the time being so ensure these requirements are still being met.

IMS will update on the progress of auditing to Rev C at a later date.

If you have any further questions or concerns please do not hesitate to contact our head office.

Below is the current IAQG Published Timeline for implementation of Revision C, please note this is subject to change.

Digg This
Reddit This
Stumble Now!
Buzz This
Vote on DZone
Share on Facebook
Bookmark this on Delicious
Kick It on DotNetKicks.com
Shout it
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Many activities within your organisation may require a consent to discharge, these activities can include metal finishing processes such as Anodising, Powder Coating, De-greasing and Cleaning.  Other industries can be effected such as Construction when performing groundwork activities and any vehicle washing processes including your own transportation.

If you are applying for ISO 14001:2004 certification through IMS you need to ensure that you have all of the correct permits and consents in place, if you are performing any activities that requires trade effluent to be discharged into the water system then an Environmental Permit or Exemption will be required before certification can be granted.

On the 6th April 2010 Environmental permits replaced discharge consents and groundwater authorisations and permits on.  If you already had a consent, authorisation or permit before this date it will have become an Environmental Permit automatically.

England and Wales

You must have an environmental permit or a registered exemption from the Environment Agency if you carry out any water discharge activity or groundwater activity.

Water discharge activities include:

  • discharge of poisonous or polluting matter or waste matter, trade effluent or sewage effluent into inland freshwaters, coastal waters and estuaries
  • discharging trade effluent or sewage effluent from land by a pipe into the sea
  • removal of material from the bottom, bed or channel of inland freshwaters that has built up at a dam, weir or sluice, by causing any of that material to be carried away in the water
  • cutting or uprooting large amounts of vegetation in or nearby any inland freshwaters if you do not try to remove the vegetation from the water.

Groundwater activities include:

  • discharging a pollutant directly into groundwater
  • discharging a pollutant that might indirectly enter groundwater
  • any other discharge that might cause a pollutant to enter groundwater directly or indirectly.

Groundwater is all water below the surface of the ground, in the saturation zone, ie below the water table.

Northern Ireland

If you discharge anything other than clean, uncontaminated surface water you must have a:

  • discharge consent for discharges to surface water
  • groundwater authorisation for discharges to groundwater.

Scotland

If you discharge anything other than clean, uncontaminated surface water to surface water or groundwater you must have:

  • an authorisation under the Controlled Activity Regulations (CAR)
  • an integrated pollution control (IPC) authorisation or pollution prevention and control (PPC) permit.

For further information or to apply for an Environmental Permit or consent to discharge please visit www.netregs.gov.uk.

Digg This
Reddit This
Stumble Now!
Buzz This
Vote on DZone
Share on Facebook
Bookmark this on Delicious
Kick It on DotNetKicks.com
Shout it
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)
© 2010 IMS International LLP Blog To go back to the main site www.imsworld.org Suffusion theme by Sayontan Sinha